August 11, 12, & 13, 2020 Field & Range Firearms
This lot is closed for bidding. Bidding ended on 8/13/2020
Lot consists of: (A) Custom Winchester Model 52 C bolt action rifle. Made 1956. Barrel is Winchester proofed, but is not correct for the rifle. Added front ramp sight and blade with custom rear flip-up, v-notch rear. Finish has been removed from the receiver and barrel. Hardwood stock set has been sanded down. Trapdoor has been installed over the magazine well, in addition to one being installed in the butt stock. Includes "W" marked five round magazine. Aftermarket steel butt plate. CONDITION: Metal retains little to none of its original finish with heavy cleaning and polishing on most of the metal. Stock has been heavily sanded. Shiny bore with crisp rifling. Mechanically operable. Safety does not work. (B) Ruger Model 10/22 semi-automatic rifle. Made 1996. Aftermarket Volquartsen stainless steel barrel. No factory iron sights. Factory drilled and tapped for a scope. Aluminum trigger and receiver with a black paint finish. Custom thumb-hole wood stock with no finish. Aftermarket rubber butt pad. Includes factory 10 round rotary magazine. CONDITION: Metal retains 95% of its original finish with a few mild handling marks. Stock has no finish and shows some milling marks. Bore is shiny with crisp rifling. Mechanically fine. (C) Mauser Standard Model bolt action rifle with scope. Made in Germany with commercial proofs. Aftermarket barrel marked "Vic Olson-Gunmaker" on the right side. Heavy blued finish on the barrel, receiver and trigger guard. Custom wood stock with no finish and a checkered steel butt plate. Includes attached Lyman All American 8x scope. CONDITION: Metal retains 90% of its finish with light wear and handling marks. Stock is solid with no finish. Shiny bore with crisp rifling. Mechanically operable. Trigger and safety should be checked by a qualified gunsmith. Scope is very good with a clear optic. JWA
Barrel Length
(A) 23" (B) 16 - 1/2" (C) 24"
Caliber/Bore
(A + B) .22LR (C) .22-250
Length of Pull
(A) 13 - 3/4" (B) 13 - 3/4" (C) 13 - 1/2"
Manufacturer
(A) Winchester (B) Ruger (C) Mauser
Model
(A) 52 C (B) 10/22 (C) Standard Model
Serial Number
(A) 83530C (B) 243-50640 (C) 115842