GUN SPRING 2017
The live portion of this session begins on Tuesday, April 11, 2017.
FACTORY ENGRAVED FREEDOM ARMS CASULL PREMIER GRADE SINGLE ACTION REVOLVER.FREEDOM ARMSPREMIER GRADEF742944MAGMODERN; C&RCal. .44 MAG. 4-3/4" bbl, full brushed stainless steel finish, 2-pc laminated wood grips. Revolver is engraved in a vine motif with a fine punch dot background. Engraving appears on both sides of the front sight, at the breech end of the bbl,ejector rod housing, on the front of the frame, in front of cyl, on recoil shield and loading gate, on rear of frame, around screws, apron of backstrap, and heel of backstrap butt. Bottom of trigger guard is also engraved. Cyl shows engraving on front and rear between bolt stops. Engraving has been attributed to Master Engraver Bill Mains, and is of B+ coverage. Left side of bbl shows Freedom Arms cal mark with Freedom, Wyoming U.S.A. address. Left side of frame shows patent mark, right side of frame is marked "FREEDOM ARMS PREMIER GRADE". SN is stamped on bottom of frame and rear of cyl, SN is also written with electric pencil on left inside of backstrap. Right inside of backstrap has number 90312-92 written in electric pencil. *NOTE* Because of the hardness of the steel, these revolvers are extremely difficult to engrave. Grips are not marked. Included are 5 snap caps for this revolver. CONDITION: Fine. Revolver shows a satin polish stainless steel finish overall with only a few slight scratch marks near the muzzle. Engraving and all markings are sharp. Grips are fine. A chance to purchase a wonderful Freedom Arms revolver. 51761-16 TEP (2,750-3,750)